57CV05-003

$

50.00    

 

 

1954-62 CONVERTIBLE BOOT WELL ADJUSTER PLATE TO SIDE RAIL CHROME LINKAGE GRAY RUBBER BOOTS:  Important parts required to prevent damage to your new convertible top. These high quality replacements will do the job perfectly. Sold in Pairs.                                                                         $50

57ZB12-001

$

10.00    

 

 

1957 - 60 GLOVEBOX BUMPERS: Stop the Rattling! Pair $10

57ZB12-002 

$

45.00    

 

 

1957 - 60 GLOVE BOX HINGE STOP                                                  Rectangular rubber grommets.
Pair:                                                                                               $45

57ZB12-003 

$

45.00    

 

 

1957 - 60 ROCKER PANEL                                                                  Molded rubber drain flaps. 4 piece set for proper underbody detail.                                                                                             $45

57ZB12-004

$

45.00    

 

 

57-58 WINDSHIELD PILLAR SEAL: Fits between the windshield pillar and the front of the vent window frame. Sold in pairs     $45

57ZB12-005A

$

85.00    

 

 

TRUNK LID SEAL: Exact reproduction. Fits, looks, and seals properly, unlike others on the market. I know there are a lot of people selling what they say are 57-58 trunk lid seals, but we are the ONLY Supplier of the CORRECT part! Our Seals will not fight with and jamb up your electric trunk motors, which is a major calamity that can be avoided by using the correct part!             $85

57ZB12-006 

$

10.00    

 

 

57-60 VOLTAGE REGULATOR MOUNT RUBBER INSULATOR GROMMETS: 3 Piece Set                                                           $10

57ZB12-007

$

13.50    

 

 

57-58 AUTRONIC EYE BOX MOUNT RUBBER INSULATOR GROMMETS: 4 Piece Set.                                                        $13.50

57ZB12-008

$

0.00    

 

 

1957 - 60 SPARK PLUG WIRE SEPARATORS                                   Pair:                                                                                              $30

57ZB12-009

$

0.00    

 

 

57-59 TAIL LIGHT 3 WIRE RUBBER GROMMETS: Mounts to the inner sheet metal, prevents tail light wires from chafing.    $50

57ZB12-017

$

0.00    

 

 

1957 - 58 TRUNK LOCK CYLINDER GASKET                                                                                                                                            $3

57ZB12-018

$

35.00    

 

 

1957 - 58 FOUR DOOR HANDLE RUBBER GASKET AND "O" RING SET 
12 Piece Set.                                                                              $35

57ZB12-019

$

20.00    

 

 

57-58 STEERING COLUMN ACCESS TRIM COVER PLATE RUBBER BUMPERS: Four Piece Set              $20 

57ZB12-020

$

30.00    

 

 

1957-60 CADILLAC ASHTRAY DOOR RUBBER BUMPER SET: Every 57-60 Cadillac on planet earth desperately needs these formerly impossible to obtain rubber parts! Now for the first time in history the correct parts are available for every 1957-60 Cadillac owner that needs to stop the endless rattling of their ashtray doors! A very tedious problem that previously had no solution other than a very loud radio. This is the only way to keep your sanity! These parts are extremely accurate reproductions. A great deal of time, effort, and money has gone into achieving absolute perfection that exceeds OEM quality. Installs in only a few minutes!  

NOTE: 4 Pc set, fits all models including Eldorado and Brougham.      $30

57ZB12-021A

$

85.00    

 

 

57-58 HEATER AND A/C FIREWALL MOLDED RUBBER “S” SHAPED DRAIN HOSE, ONE:  An exact duplicate of this complex curved part. Accurate right down to exact style ribs in the hose! Believe me  it was no easy task get these made properly! 2 Required: Fits All Models Including Eldorado and Brougham!

NOTE: These parts are not the ridiculously hokey incorrect molded heater hoses I see others trying to sell for this application. I often see totally incorrect restoration parts being offered. This kind of "Theme Park Rodent" approach to restoration always perplexes me! My thoughts are always why bother having it at all? I would rather have nothing than the wrong part! The wrong part has zero value! 

PLEASE CLICK HERE FOR MORE INFO ON THIS ITEM, AND FOR PAYPAL LINKS TO PURCHASE THIS ONE ITEM ONLY.  PLEASE USE SHOPPING CART SYSTEM FOR MULTIPLE ITEM ORDERS ONLY.

57ZB12-021B

$

170.00    

 

 

57-58 HEATER AND A/C FIREWALL MOLDED RUBBER “S” SHAPED DRAIN HOSE, PAIR:  An exact duplicate of this complex curved part. Accurate right down to exact style ribs in the hose! Believe me  it was no easy task get these made properly! 2 Required: Fits All Models Including Eldorado and Brougham!

NOTE: These parts are not the ridiculously hokey incorrect molded heater hoses I see others trying to sell for this application. I often see totally incorrect restoration parts being offered. This kind of "Theme Park Rodent" approach to restoration always perplexes me! My thoughts are always why bother having it at all? I would rather have nothing than the wrong part! The wrong part has zero value!

PLEASE CLICK HERE FOR MORE INFO ON THIS ITEM, AND FOR PAYPAL LINKS TO PURCHASE THIS ONE ITEM ONLY.  PLEASE USE SHOPPING CART SYSTEM FOR MULTIPLE ITEM ORDERS ONLY.

57ZB12-022

$

0.00    

 

 

57-58 HEATER BOX FIREWALL MOLDED RUBBER “L” SHAPED DRAIN HOSE:  An exact duplicate of this complex curved part. Accurate right down to exact style rib in the hose! Believe me  it was no easy task get these made properly! 1 Required: Fits All Models Including Eldorado and Brougham!

57ZB12-023 

$

35.00    

 

 

1957/58 STEERING COLUMN TO FIREWALL BRACKET RUBBER SEAL This part seals the engine compartment off from the interior compartment where the steering column goes through the firewall.                                                                                          $35

57ZZ12-001

$

22.50    

 

 

57-58 DOOR HANDLE GASKET AND "O" RING SET: A high quality reproduction complete with new "o" rings for the push buttons. $22.50

 NOTE: All the other Cadillac parts suppliers sell parts with a bead around the edge of the door handle, which is totally the wrong thing for this application.

57ZZ12-002

$

75.00    

 

 

57-58 WINDSHIELD WIPER/WASHER VACUUM HOSE KIT:  Complete with the four tube rubber extrusion that pulls apart like licorice, single hoses, schematic, and plastic "T".                          $75

NOTE: Nowhere in the Cadillac manual does it explain where all this spaghetti hooks up! You will definitely find that the schematic alone is worth the price of the kit! 

This kit will fit on standard 57-58 Cadillac, not on Eldorado Brougham. Please use part # 57EB12-023 for 57-58 Brougham. 

57ZZ12-003

$

165.00    

 

 

57-58 WHEEL WELL AND INNER FENDER SEAL KIT: Custom form cured extrusions resulting in precise shape and dimensions. Factory quality cut and ground ends for exact fit and finish. No home made looking raw edges because no cutting or modifications are required. Very high quality, ready to install, 4 piece set. Unavailable elsewhere!                    $165   

58EB12-001

$

25.00    

 

 

1958 COWL RUBBER GROMMET PLUGS                                         4 Piece Set.                                                                                    $25

58EB12-002

$

0.00    

 

 

1958 DECK LID LARGE SCREW ON BUMPER 
For rear edge of lid, exact with metal core. 
Pair:                                                                                               $35

57BZ05-004

$

85.00    

 

 

1957-60 ELDORADO BIARRITZ CONVERTIBLE HARD BOOT RUBBER MOUNT/SPACERS: Many people do not even know these parts exist, but they are a must have item for proper fit of the Fiberglass Hard Boot. Without these critical parts your fiberglass boot will chafe against the body of the car and damage your very expensive paint job! You guys with metallic paint jobs especially do not want to go there. Installing the correct parts is much less expensive, and much less hassle! 5 PC Set                                                                                           $85

59EB12-001 

$

600.00    

 

 

59-60 PININFARINA BROUGHAM MOLDED ROOF RAIL RUBBER SEALS: This is a very complex part to replicate. It took many years of trial and error to get this right! We built many expensive dies and fixtures that did not work before we were done, but now have parts that are easily 10X better than OEM. Detailed installation instructions included, and believe me when I say you will need them!  $600

59EB12-002

$

0.00    

 

 

1959 - 60 PININFARINA BROUGHAM TRUNK LID SEAL                  Exact reproduction.                                                                      $75

59ZB12-001

$

0.00    

 

 

1959 WHEEL WELL MUD FLAP KITS                                                 With inner fender extrusions, absolutely the most complete set available.                        
18 Piece Set Without AC:                                                             $175
22 Piece Set With AC:                                                                  $225

59ZB12-002 

$

65.00    

 

 

1959 GRILL BULLET RUBBER EXTRUSION                                     Enough for one front grill assembly.                                               $65

59ZB12-003

$

165.00    

 

 

1959 WHEEL WELL AND INNER FENDER SEAL KIT:  Custom form cured extrusions resulting in precise shape and dimensions. Factory quality cut and ground ends for exact fit and finish. No home made looking raw edges because no cutting or modifications are required. Very high quality, ready to install,  4 piece set. Unavailable elsewhere!                                         $165    

59ZB12-004

$

0.00    

 

 

1959 - 60 DOOR LOCK CYLINDER GASKETS                                   Pair:                                                                                                  $3

59ZZ12-002

$

60.00    

 

 

59-60 REAR GRILL TO INNER BODY SEAL KIT: If you have a large gap between the rear grill and the inner body where the trunk lid seal fits you are most likely in need of these commonly missing rubber seals. Now you can install exact replicas of the OEM parts made in the precise shape and exact dimensions. Factory quality cut and ground ends for exact fit and finish. No home made looking raw edges because no cutting or modifications are required. Very high quality, ready to install, 2 piece set.                                   $60                                                                                                                                                           

 NOTE: These parts fit on the upper part of the rear grill itself, between the rear grill and the inner body, near the trunk lid seal area. 98% of all 59-60 Cadillac cars had this part installed at the factory. However there are some very rare cars that do not have the channel built into the rear grill required to accept the rubber seals. These rare cars never had these seals installed at the factory. As a result a very large gap will be noticeable in this area.

60ZB12-001

$

0.00    

 

 

1960 WHEEL WELL MUD FLAP KITS
With inner fender extrusions,. Absolutely the most complete set available.
24 Piece sets with AC                                                   $225
20 Piece set without AC                                                $175

60ZB12-002

$

65.00    

 

 

1960 GRILL BULLET RUBBER EXTRUSION: Enough for one complete front grill, including both front corner pieces.                 $65

60ZB12-003:

$

165.00    

 

 

1960 WHEEL WELL AND INNER FENDER SEAL KIT:  Custom form cured extrusions resulting in precise shape and dimensions. Factory quality cut and ground ends for exact fit and finish. No home made looking raw edges because no cutting or modifications are required. Very high quality, ready to install,  4 piece set. Unavailable elsewhere!                                         $165         

99ZZ12-001

$

0.00    

 

 

MASTICATED, FABRIC REINFORCED RUBBER SHEET                  For making your own front end "A" arm mud flaps and splash aprons. Sold in 42" X 60" sheets.17.5 square foot total. This will do the job when the part you need is not available.  
Pair:                                                                                         Inquire

57ZB06-011

$

125.00    

 

 

57-58 SQUARE HEATER DUCT BOOT: Square to rectangle accordion type boot, connects blower motor assembly to heater core box. Many, many years of collecting old scraps and a lot of very hard work went into creating the prints for this difficult to make part. The OEM parts never fit right from day one. Our re-design looks identical to OEM, but actually fits properly, what a concept!                       $125


THIS IS THE REAL DEAL! PLEASE DO NOT CONFUSE OUR EXTREMELY HIGH QUALITY PART, THAT LOOKS AND FITS PERFECT, WITH THE VERY LOW QUALITY AND VERY POORLY MADE PIRATED COUNTERFEIT COPY OF OUR DESIGN BEING SOLD ELSEWHERE! THIS IS THE REAL DEAL!

57EB12-017 RUBBER FRONT BUMPER END BULLETS                                                                                Each: 75.00

57EB12-028 BATTERY TERMINAL RUBBER COVERS                                                                                 Pair: 25.00                                                                                
     
57EB12-033 FRONT DOOR SPONGE     Extrusions enough for both front doors.  
   
57EB12-041 REAR DOOR SPONGE EXTRUSION                                                                                         
  Enough for both doors. A must for proper alignment and action.  

 57ZB12-008 1957 - 60 SPARK PLUG WIRE SEPARATORS                                                                          Pair: 30.00
   
57ZB12-009 1957 - 59 TAIL LIGHT 3 WIRE RUBBER HOLE GROMMETS                                                      Pair: 50.00
  Mounts inside the trunk compartment.  
   
57ZB12-017 1957 - 58 TRUNK LOCK CYLINDER GASKET                                                                                    3.00

57ZB12-020 1957/58 ASHTRAY RUBBER BUMPER SET 
Installing these tiny rubber bumpers is the only way to align the ashtray doors properly and stop 
that endless rattling! 4 piece set.              

      
58EB12-002 1958 DECK LID LARGE SCREW ON BUMPER                                                                             Pair: 35.00
  For rear edge of lid, exact with metal core.  

59EB12-002 1959 - 60 PININFARINA BROUGHAM TRUNK LID SEAL                                                                      75.00
  Exact reproduction.  
   
59ZB12-001 1959 WHEEL WELL MUD FLAP KITS                                                               22 Piece Set With AC: 225.00
  With inner fender extrusions, absolutely the most complete set available.                         18 Piece Set Without AC: 175.00

59ZB12-004 1959 - 60 DOOR LOCK CYLINDER GASKETS                                                                              Pair: 3.00
   
60ZB12-001 1960 WHEEL WELL MUD FLAP KITS With inner fender24 Piece sets with AC                                    225.00
  extrusions,. Absolutely the most complete set available. 20 Piece set without AC                                                175.00

99ZZ12-001 MASTICATED, FABRIC REINFORCED RUBBER SHEET                                                                  inquire
  For making your own front end "A" arm mud flaps and splash aprons. Sold in 42" X 60" sheets.
17.5 square foot total. This will do the job when the part you need is not available.  
Pair: